Aerosol Determination (Photometric)
Evaluation of airborne particulate matter concentrations measured via direct-reading photometers.
Method: CEN TR 16013-3
Aerosol Determination
Ambient and personal exposure measurements for respirable, total, thoracic, and photometric aerosols.
Thoracic Aerosol Determination
Personal exposure and workplace ambient determination of respirable, total, and thoracic aerosol fractions.
Method: HSE-MDHS 14/4
Alkali Dusts
Determination of ambient and personal exposure to alkali dusts (Sodium Hydroxide, Potassium Hydroxide, Lithium Hydroxide).
Determination of Total Alkali Dusts
Analytical determination of total alkali dusts (Sodium Hydroxide NaOH, Potassium Hydroxide KOH, Lithium Hydroxide LiOH).
Method: NIOSH NMAM 7401
Lighting
Illuminance (Lux) level and light intensity surveys across workplace environments.
Workplace Illuminance Survey
Measurement of illuminance (Lux) levels in workplace zones conforming to occupational hygiene and safety standards.
Method: COHSR 928-1-IPG-039
Electromagnetic Field
Electromagnetic field (EMF) exposure assessment originating from electronic equipment and industrial power installations.
Electromagnetic Field (EMF)
Occupational electromagnetic field exposure assessment from industrial electronic equipment and power facilities (0 Hz – 1 MHz).
Method: TS EN 50413
Gauss
Surface magnetic field strength and magnetic flux density measurements for industrial separators (0–30,000 G).
Magnetic Flux Density (Gauss)
Measurement of static surface magnetic flux density using calibrated Gauss meters (0–30,000 G).
Method: TA.138 Rev.01 (TS 4490 EN 60404-3)
Gases
Sampling and analytical determination of toxic gases, inorganic gases, acid mists, and volatile chemical vapors.
Hydrogen Cyanide (HCN) Determination
Determination of hydrogen cyanide concentrations in personal breathing zones and workplace air.
Method: NIOSH 6010
Formaldehyde (CH2O) Determination
Spectrophotometric determination of formaldehyde vapor in workplace air using visible absorption spectroscopy.
Method: NIOSH NMAM 3500
Ammonia (NH3-N) Determination
Sampling of airborne ammonia gas onto treated silica gel tubes followed by spectrophotometric determination.
Method: NIOSH NMAM 6015
O2, CO, H2S, and Methane (CH4, %LEL)
Direct-reading portable multi-gas detection and real-time monitoring in occupational confined spaces and process areas.
Method: TA.110 (NIOSH 6604 / 6601)
CO2, SO2, and NO2 Determination
Electrochemical sensor detection and direct-reading measurement of CO2, SO2, and NO2 gas components.
Method: TA.110 (NIOSH 6604 / 6601)
Oxygen (O2) Determination
Measurement and continuous monitoring of ambient oxygen concentrations conforming to NIOSH NMAM 6601.
Method: NIOSH NMAM 6601
Carbon Monoxide (CO) Determination
Occupational carbon monoxide (CO) exposure assessment and electrochemical detection conforming to NIOSH 6604.
Method: NIOSH NMAM 6604
Nitric Oxide (NO) and Nitrogen Dioxide (NO2)
Solid sorbent tube active air sampling and spectrophotometric determination of airborne NO and NO2 gases.
Method: NIOSH NMAM 6014
Sulfur Dioxide (SO2) Determination
Ion chromatography (IC) determination of sulfur dioxide (SO2) collected on treated membrane filters.
Method: NIOSH-NMAM 6004
Bromine (Br2) and Chlorine (Cl2) Determination
Ion chromatographic determination of free halogen vapors (Bromine Br2 and Chlorine Cl2) in workplace atmospheres.
Method: NIOSH-NMAM 6011
Hydrogen Fluoride (HF) Determination
Conductivity-detected ion chromatography determination of airborne hydrogen fluoride and fluoride salts.
Method: NIOSH-NMAM 7906
HCl, HBr, and HNO3 Determination
Ion chromatographic quantification of inorganic acid vapors (Hydrochloric HCl, Hydrobromic HBr, and Nitric HNO3).
Method: NIOSH-NMAM 7907
Phosphoric (H3PO4) and Sulfuric (H2SO4) Acid
Ion chromatographic determination of non-volatile inorganic acid mists (Phosphoric H3PO4 and Sulfuric H2SO4).
Method: NIOSH-NMAM 7908
Ozone (O3) Determination
Ion chromatographic (IC) quantification of occupational ozone gas concentrations in workplace air.
Method: OSHA-ID 214
Hydrogen Peroxide (H2O2) Determination
Active sampling on treated glass fiber filters and analytical quantification of hydrogen peroxide vapor under OSHA-ID 1019.
Method: OSHA-ID 1019
Noise
Personal noise dosimetry, workplace ambient noise mapping, and occupational sound source evaluations.
Workplace Ambient Noise Survey
Determination of ambient sound pressure levels and occupational noise mapping across facility workshops.
Method: TS ISO 1996-2
Noise Exposure from Sources Close to the Ear
Evaluation of sound exposure from headsets and communication devices close to the ear utilizing the MIRE technique.
Method: TS EN ISO 11904-1
Personal Noise Dosimetry Survey
Personal noise dosimetry determining Lex,8h daily noise exposure levels and peak C-weighted sound pressure values.
Method: TS EN ISO 9612
Carbon Black
Determination of airborne carbon black particulate concentrations in workplace air.
Carbon Black Determination (OSHA ID 196)
Sampling and gravimetric quantification of airborne carbon black dust in rubber, polymer, and pigment facilities.
Method: OSHA ID 196
Carbon Black Determination (NIOSH 5000)
Airborne sampling and analytical determination of carbon black particulates conforming to NIOSH NMAM 5000.
Method: NIOSH NMAM 5000
Chemical Factor Measurements
Inhalation exposure assessment strategy and statutory occupational exposure limit (OEL) comparisons under TS EN 689.
Chemical Exposure Strategy & OEL Comparison
Formulation of Homogeneous Exposure Groups (HEGs), statistical validation, and compliance testing conforming to TS EN 689.
Method: TS EN 689
Rubber Fumes and Rubber Dust
Determination of process fumes and dust particulates generated during rubber and elastomer manufacturing.
Rubber Fumes and Rubber Dust Determination
Cyclohexane-soluble particulate matter and fume quantification from vulcanization, extrusion, and mixing lines.
Method: HSE-MDHS 47/3
Metalworking Fluids (MWF)
Occupational exposure evaluation and mist/particulate sampling for metalworking and cutting fluids.
Metalworking Fluid (MWF) Determination
Sampling and gravimetric determination of total particulate and extractable thoracic aerosol mists from machining fluids.
Method: NIOSH NMAM (CDC) 5524
Metals
Multi-element heavy metal quantification via ICP-OES, specialized mercury vapor, and hexavalent chromium (Cr VI) analyses.
Hot Block Acid Digestion (ICP-OES)
Multi-element heavy metal profile quantification across 27 elements via hot block digestion and ICP-OES spectroscopy.
27 Sub-Parameters / Chemical Scope
Aluminum (Al)
Arsenic (As)
Beryllium (Be)
Barium (Ba)
Cadmium (Cd)
Calcium (Ca)
Chromium (Cr)
Cobalt (Co)
Copper (Cu)
Iron (Fe)
Lead (Pb)
Lityum (Li)
Magnesium (Mg)
Manganez (Mn)
Molybdenum (Mo)
Nickel (Ni)
Phosphorus (P)
Potassium (K)
Selenium (Se)
Silver (Ag)
Thallium (Tl)
Titanium (Ti)
Vanadium (V)
Zinc (Zn)
Sodium (Na)
Tin (Sn)
Antimony (Sb)
Method: NIOSH NMAM 7302
Microwave Acid Digestion (ICP-OES)
Closed-vessel microwave digestion and simultaneous ICP-OES analytical determination of 26 metallic elements.
26 Sub-Parameters / Chemical Scope
Aluminum (Al)
Arsenic (As)
Beryllium (Be)
Barium (Ba)
Cadmium (Cd)
Calcium (Ca)
Chromium (Cr)
Cobalt (Co)
Copper (Cu)
Iron (Fe)
Lead (Pb)
Lityum (Li)
Magnesium (Mg)
Manganez (Mn)
Molybdenum (Mo)
Nickel (Ni)
Phosphorus (P)
Potassium (K)
Selenium (Se)
Silver (Ag)
Thallium (Tl)
Titanium (Ti)
Vanadium (V)
Zinc (Zn)
Sodium (Na)
Tungsten (W)
Method: NIOSH NMAM 7300
Mercury Vapor (Hg) Determination
Sampling of airborne inorganic mercury vapor onto solid sorbent tubes followed by cold vapor atomic absorption spectroscopy.
Method: NIOSH 6009
Hexavalent Chromium (Cr VI) Determination
Spectrophotometric quantification of carcinogenic hexavalent chromium (Cr VI) in welding fumes and coating operations.
Method: NIOSH NMAM 7600
Mineral Oil Mists
Quantification of airborne concentrations of mineral-based oil mists and chemical vapors.
Mineral Oil Mist Determination
Infrared spectroscopic and gravimetric analysis of mineral oil mists and aerosolized lubricants in workplace air.
Method: HSE MDHS 84/2
Silica
Determination of respirable crystalline silica (Quartz / Free Silica / SiO2) in occupational dust fractions.
Respirable Crystalline Silica (SiO2 / Quartz)
Quantitative XRD / FTIR determination of quartz and cristobalite crystalline silica within respirable dust cyclone samples.
Method: NIOSH-NMAM 7602
Thermal Comfort
Microclimate evaluations utilizing PMV, PPD, WBGT heat stress, and IREQ cold strain indices.
Thermal Comfort (PMV & PPD Indices)
Evaluation of moderate thermal environments calculating Predicted Mean Vote (PMV) and Predicted Percentage Dissatisfied (PPD).
Method: TS EN ISO 7730
WBGT Heat Stress Evaluation
Assessment of hot working environments and occupational heat strain utilizing the Wet Bulb Globe Temperature (WBGT) index.
Method: TS EN ISO 7243
Cold Stress Determination (IREQ)
Assessment of cold environments determining required clothing insulation (IREQ) and duration limit exposure values.
Method: TS EN ISO 11079
Vibration
Hand-arm and whole-body mechanical vibration exposure assessments conforming to ISO standards.
Machinery Vibration Emissions Survey
Measurement of vibration acceleration, velocity, and displacement emission values on industrial machines.
Method: TS EN 1032+A1
Hand-Arm Vibration Exposure (Part 1)
General measurement and daily vibration exposure A(8) calculation transmitted from vibrating hand-held power tools.
Method: TS EN ISO 5349-1
Hand-Arm Vibration Practical Guide (Part 2)
Practical on-site implementation and task-specific evaluation of hand-arm vibration conforming to ISO 5349-2.
Method: TS EN ISO 5349-2
Whole-Body Vibration (WBV)
Assessment of whole-body vibration transmitted through seat and floor to mobile equipment, forklift, and crane operators.
Method: TS ISO 2631-1
Dust / Particulates
Gravimetric sampling and quantification of inhalable, thoracic, total, and respirable workplace dust fractions.
Total and Respirable Dust Determination
Gravimetric personal exposure and ambient workplace sampling of inhalable and respirable dust fractions under HSE-MDHS 14/3.
Method: HSE-MDHS 14/3
Respirable Dust Determination (ASTM)
Cyclone sampler collection and gravimetric determination of respirable aerosol particulates under ASTM D 4532-22.
Method: ASTM D 4532-22
Total Inhalable Dust Determination
Closed/open-face cassette sampling and gravimetric determination of total inhalable particulate concentrations under NIOSH 0500.
Method: NIOSH NMAM 500
Respirable Dust Determination
10-mm nylon or aluminum cyclone collection and gravimetric determination of respirable dust fractions under NIOSH 0600.
Method: NIOSH NMAM 600
VOC and Detector Tubes
Chromatographic determination (GC-FID / GC-MS) and direct-reading detector tube assays for 100+ volatile organic compounds.
Volatile Organic Compounds (VOC) – GC-FID
Active charcoal tube sampling and gas chromatography flame ionization detection (GC-FID) quantification for 55 individual VOC compounds.
55 Sub-Parameters / Chemical Scope
Metanol (Metil alkol)
1-Butanol (n-Butil alkol)
1-Propanol
2-Bütanon (Etilmetil keton)
2-Propanol (İPA)
5-Metil-3-heptanon
Aseton (Dimetil Keton)
Asetonitril (Metil Siyanür)
Butilglikol (2-Butoksietanol)
Etanol (Etil alkol)
Etil Asetat
n-Hekzan
n-Bütil asetat
Tetrahidrofuran
Benzen
Bromobenzen
Bromoklorometan
Bromoform
n-Butilbenzen
Sec-Butilbenzen
Tert-Butilbenzen
Karbon Tetraklorür
Klorobenzen
Kloroform
Cis-1,2-Dikloroetilen
Dibromoklorometan
1,2-Dibromoetan
Dibromometan
1,2-Diklorobenzen
1,3-Diklorobenzen
1,4-Diklorobenzen
1,1-Dikloroetan
1,2-Dikloroetan
1,1-Dikloroetilen
Trans-1,2-Dikloroetilen
1,2-Dikloropropan
1,3-Dikloropropan
1,1-Dikloropropilen
Trans-1,3-Dikloropropilen
Etilbenzen
Hekzaklorobütadien
Metilen Klorür
Naftalin
n-Propilbenzen
Stiren
Toluen
1,2,3-Triklorobenzen
1,2,4-Triklorobenzen
1,1,1-Trikloroetan
1,1,2-Trikloroetan
Trikloroetilen
1,2,4-Trimetilbenzen
m-Ksilen
o-Ksilen
p-Ksilen
Method: TS ISO 16200-1 (GC-FID)
Volatile Organic Compounds (VOC) – GC-MS
Thermal desorption / solvent extraction and gas chromatography mass spectrometry (GC-MS) qualitative and quantitative analysis of 78 VOCs.
78 Sub-Parameters / Chemical Scope
Metanol
sec-Butilbenzen
trans-1,3-Dikloropropilen
n-Bütanol
Tert-Butilbenzen
Etilbenzen
1-Propanol
1,2-Dikloroetan
1,2,4-Trimetilbenzen
Benzen
1,1-Dikloroetilen
m,p-Ksilen
Bromobenzen
trans-1,2-Dikloroetilen
Karbon Tetraklorür
Hekzaklorobütadien
Metil Etil Keton (MEK)
Klorobenzen
Diklorometan
2-Propanol (IPA)
Kloroform
Naftalen
5-Metil-3-Heptanon
cis-1,2-Dikloroetilen
n-Propilbenzen
Aseton
Dibromoklorometan
Stiren
Asetonitril
1,2-Dibromoetan
Toluen
Butilglikol
Dibromometan
1,2,3-Triklorobenzen
Etanol
1,2-Diklorobenzen
1,2,4-Triklorobenzen
Etilasetat
1,3-Diklorobenzen
1,1,1-Trikloroetan
n-Hekzan
1,4-Diklorobenzen
1,1,2-Trikloroetan
n-Butilasetat
1,1-Dikloroetan
Trikloroetilen
Tetrahidrofuran
o-Ksilen
Bromodiklorometan
1,2-Dikloropropan
Bromoform
1,3-Dikloropropan
n-Butilbenzen
1,1-Dikloropropilen
1,4-Dioksan
Asetik asit
2-Heksanon (MBK)
İzobütanol (2-Metil-1-propanol)
Metil asetat
Sikloheksanon
Dietil eter
İzopropil asetat
n-Heptan
n-Pentan
1-Metoksi-2-propanol (PGME)
Bromoklorometan
2-Klorotoluen
4-Klorotoluen
1,2-Dibromo-3-kloropropan
2,2-Dikloropropan
cis-1,3-Dikloropropilen
İzopropilbenzen (Kümen)
4-İzopropiltoluen (p-Simen)
1,1,1,2-Tetrakloroetan
1,1,2,2-Tetrakloroetan
Tetrakloroetilen (Perkloroetilen)
1,2,3-Trikloropropan
1,3,5-Trimetilbenzen (Mesitilen)
Method: TS ISO 16200-1 (GC-MS)
Gas Determination via Colorimetric Detector Tubes
Direct-reading colorimetric detector tubes and piston hand pumps for immediate field concentration screening of 129 chemical gases and vapors.
129 Sub-Parameters / Chemical Scope
Diizopropilamin (C₆H₁₅N)
N,N-Dimetilanilin (C₈H₁₁N)
Dipropilamin (C₆H₁₅N)
N-Metilanilin (C₇H₉N)
Morfolin (C₄H₉NO)
Pentilamin (C₅H₁₃N)
Propilamin (C₃H₉N)
Pridin (C₅H₅N)
O-Toludin (C₇H₉N)
P-Toludin (C₇H₉N)
İzopropilasetat (C₅H₁₀O₂)
Tert-Bütanol (C₄H₁₀O)
Butyl Ether (C₈H₁₈O)
Butyl Methacrylate (C₈H₁₄O₂)
tert-Butyl Methyl Ether (C₅H₁₂O)
Cumene (C₉H₁₂)
Cyclohexane (C₆H₁₂)
Decahydronaphthalene (C₁₀H₁₈)
n-Decane (C₁₀H₂₂)
Diethylbenzene (C₁₀H₁₄)
Ethyl Methacrylate (C₆H₁₀O₂)
Diisopropyl Ether (C₆H₁₄O)
n-Nonane (C₉H₂₀)
1,2,4-Trimethylbenzene (C₉H₁₂)
p-Dichlorobenzene (C₆H₄Cl₂)
Undecane (C₁₁H₂₄)
Acrylonitrile (C₃H₃N)
Acetaldehyde (C₂H₄O)
Tetrachloroethylene (C₂Cl₄)
Carbon Disulfide (CS₂)
Mercury Vapor (Hg)
Naphthalene (C₁₀H₈)
Bromochloromethane (CH₂BrCl)
Bromoform (CHBr₃)
1-Bromopropane (C₃H₇Br)
2-Bromopropane (C₃H₇Br)
Dibromomethane (CH₂Br₂)
1,2-Dichloropropane (C₃H₆Cl₂)
Nitrogen Dioxide (NO₂)
Phosphine (PH₃)
Nitric Acid (HNO₃)
Hydrogen Bromide (HBr)
Nitrogen Oxides (NOx)
Butane (C₄H₁₀)
Hydrogen (H₂)
Vinyl Chloride (CH₂CHCl)
Ethylene Glycol (C₂H₆O₂)
Pentyl Acetate (C₇H₁₄O₂)
Styrene (C₈H₈)
Divinylbenzene (C₆H₄)
alpha-Pinene (C₁₀H₁₆)
Hydrogen Cyanide (HCN)
Phosgene (COCl₂)
Acetylene (C₂H₂)
Hydrogen Peroxide (H₂O₂)
Oxygen (O₂)
Chlorine (Cl₂)
Methyl Methacrylate (C₅H₈O₂)
Butylamine (C₄H₁₁N)
Cyclohexylamine (C₆H₁₃N)
Dibutylamine (C₈H₁₉N)
Oil Mist
Sulfur Dioxide (SO₂)
Ammonia (NH₃)
Carbon Monoxide (CO)
Hydrogen Sulfide (H₂S)
Propane (C₃H₈)
Carbon Dioxide (CO₂)
Hydrogen Fluoride (HF)
Formaldehyde (CH₂O)
Hydrogen Chloride (HCl)
Ozone (O₃)
Sulfuric Acid (H₂SO₄)
Acetic Acid (CH₃COOH)
Ethyl Bromide (C₂H₅Br)
General Hydrocarbons
Methyl Isothiocyanate (C₂H₃NS)
Ethylbenzene (C₈H₁₀)
Ethylene (C₂H₄)
Acetone (C₃H₆O)
Methyl Ethyl Ketone (C₄H₈O)
Ethyl Acetate (C₄H₈O₂)
Butyl Acetate (C₆H₁₂O₂)
Ethylene Oxide (C₂H₄O)
Propylene Glycol (C₃H₈O₂)
Propylene Oxide (C₃H₆O)
Kerosene, Heptane (C₇H₁₆)
Methyl Mercaptan (CH₄S)
Methanol (CH₄O)
1-Butanol (C₄H₁₀O)
Methyl Isobutyl Ketone (C₆H₁₂O)
2-Ethoxyethanol (C₄H₁₀O₂)
Tetrahydrofuran (C₄H₈O)
1,1,1-Trichloroethane (C₂H₃Cl₃)
Arsine (AsH₃)
Isopropanol (C₃H₈O)
Phenol (C₆H₆O)
Cresol (C₇H₈O)
Aniline (C₆H₅NH₂)
Ethylamine (C₂H₇N)
Inorganic Gas Identifier
Amines
Formic Acid (HCOOH)
Acetic Anhydride (C₄H₆O₃)
Acrylic Acid (C₃H₄O₂)
Butyric Acid (C₄H₈O₂)
Isobutyric Acid (C₄H₈O₂)
Isovaleric Acid (C₅H₁₀O₂)
Maleic Anhydride (C₄H₂O₃)
Methacrylic Acid (C₄H₆O₂)
Allyl Alcohol (C₃H₆O)
Propionic Acid (C₃H₆O₂)
n-Valeric Acid (C₅H₁₀O₂)
Organic Gas Identifier
Pentane (C₅H₁₂)
Hexane (C₆H₁₄)
Trichloroethylene (C₂HCl₃)
Butadiene (C₄H₆)
Gasoline
Benzene (C₆H₆)
Toluene (C₇H₈)
Xylene (C₈H₁₀)
Carbon Tetrachloride (CCl₄)
Dimethylformamide (C₃H₇NO)
Methyl Acrylate (C₄H₆O₂)
Butyl Acrylate (C₇H₁₂O₂)
Ethyl Acrylate (C₅H₈O₂)
Chlorine Dioxide (ClO₂)
Chlorine (Cl₂)
Method: ASTM D 4490